frequently asked questions

A: Shipping usually occurs by the very next day of purchase. Typical transit times are 4-10 business days in most cases. (weather and other factors can affect this) You should receive a call from the freight carrier approximately 24-48 hours ahead of time to coordinate the specific delivery date and time of your stove.

A: No, we strictly ship to the contiguous 48 states within the U.S. only. For Alaska residents, we recommend purchasing through Home Depot. Visit our Canadian website at www.comfortbilt.biz or www.comfortbilt.ca to purchase our brand in Canada.

A: We offer FREE standard shipping on all of our stoves purchased on our website.

A: Pellet stoves are shipped via LTL truck with liftgate direct to your home. When placing orders please ensure a semi tractor trailer will be able to make it to the home. The drivers may be able to bring the stove over the threshold into the Home (with help), provided there are no steps, stairs, or steep inclines to the home. 

A: Yes. We warehouse a full inventory of replacement parts for all stoves right here in North Carolina, so the turnaround time is fairly quick. We ship priority mail the same day or the next day in most cases, and transit time is 3 days on average.

A: We accept all major credit cards, as well as Paypal, Google pay, Apple pay, and Amazon pay.

A: Selecting Paypal as your preferred payment method will allow you to choose a 6 month finance option. Selecting Klarna as your preferred payment method will allow you to select a variety of financing options up to 36 months.

Q: What is the manufacturer warranty? What does it cover?

A: All ComfortBilt stoves come with a 1 year manufacturer warranty that will cover parts, labor, and shipping costs for any kind of failure within the stove. Issues caused by neglect, or a lack of general cleanings, or by the burning of unsupported fuels are not covered and may void warranty.

A: The manufacturer warranty is a 1 year bumper to bumper warranty while the extended parts warranty covers all replacement and shipping for failed or compromised components.

A: Yes, the manufacturer warranty and extended parts replacement warranty both cover damage to the burn pot from normal operational use.

A: We always offer a $50 Veteran, and active military discount on qualifying stove purchases. Thank you for your service! Use coupon code: Military50 at checkout. We also run holiday and off season specials occasionally, so make sure to follow us on Facebook for all of the current promotions. https://www.facebook.com/ComfortBilt/

A: Our advice is to purchase on the platform that you feel the most comfortable with. Our stoves are sold on a variety of online platforms, but many times ordering directly from Comfortbilt.net will be the most economical option. Other platforms may be slightly more expensive after calculating additional fees, taxes, and shipping costs. Be sure to shop around for the best deal.

A: Many states do have rebate programs for qualifying pellet stove purchases or wood stove replacement. https://www.comfortbilt.net/pages/rebates-credits/

A: The final assembly of our stoves are done in Ningbo,China (just like Apple does with the iPhone) with parts from Germany, France, Canada and the USA. When we receive the stoves our inspection team completes a 24 point inspection to ensure the motors, switches, ignition and air flow performance meets our requirements. That is why our stoves consistently receive 5 Star reviews for performance and customer service on many platforms.

A: Many factors other than square footage can influence how much heat your space may need, such as insulation ratings, ceiling height/volume, layout, and climate for your area. In our experience it is usually advisable to get a larger stove operating on a lower setting, that way it has the capacity to increase should you need it. Check out our product videos for product comparisons: https://www.youtube.com/channel/UCliCkwEYSXP2dAhKz-Y8ZEA/videos

A: The SS descriptor just signifies that the stove has a stainless steel trimming around the window glass. There are no operational differences between the SS and standard models other than aesthetics. The steel trim has a brushed texture and is more muted than chrome or polished metals. Currently only available for the HP22 and HP21 series.

A: The HP22 comes in Charcoal, Burgundy, Bronze, Green, and Apricot.

The HP22N comes in Charcoal, Burgundy, Bronze and Apricot.

The HP50 comes in Charcoal, Burgundy, Green, and Apricot.

The HP61 comes in Charcoal and Bronze.

The HP21, HP22i, HP54, and HP55 are only available in Charcoal.

A: With an adjustable room blower/distribution fan, they can be very quiet on lower levels. Many of our customers say it is one of the quietest pellet stoves they have experienced.

A: Most stoves, at default settings, will consume between 2-3 lbs of pellets per hour of operation. Electricity consumption: 520W during the ignition phase (about 8-10 mins) and then falls to 150W of power during regular operation.

A: Most of the stoves will consume about 2-3 lbs per hour of operation on average. External factors such as the size and insulation of the space, and the outside temperature can significantly affect this.

A: A majority of installs are done without the outside air kit. If you are installing in a mobile home, or in a garage/basement/shop setting, or if the stove is being installed at or above 5,000 ft. in elevation, then outside air is recommended/required. If installed on the main level of a traditional, stick-built home at lower elevations, the stove will typically meet its oxygen demands by drawing in air from the interior. (more information can be found in the operator’s manual: https://www.comfortbilt.net/pages/stove-manuals)

A: Our stoves have a built in temperature sensor that can read the temperature of the room. While in the “Temperature” mode, the stove will automatically adjust the level of the stove to satisfy your desired temperature. Currently there is not a way to adapt to an external thermostat until our Wifi controllers are cleared by the EPA.

A: Most stoves are equipped with an ECO mode function that will allow it to fully shut down when the desired temperature is met. After cooling about 5° F, the stove will automatically reignite and bring the room back up to the desired temperature. For the stoves that do not have the ECO option, the stove will fall back to “pilot” mode, and continue operating on the lowest level.

A: A hearth pad is not always necessary. As long as the stove sits on a noncombustible surface that meets the front and side clearances, this will satisfy the floor protection requirements. A hearth pad is an easy, convenient, and attractive way to satisfy floor protection requirements however. https://www.comfortbilt.net/hearth-pads/

A: The dimensions of the corner hearth pads are 40” x 40”. The dimensions of the flat-wall hearth pads are 36” x 36”. All of our hearth pads will satisfy the floor protection requirements for any ComfortBilt pellet stove with the exception of the HP54 and the HPC75 on a corner pad. (Floor protection requirements can be found in the Operator’s Manual: https://www.comfortbilt.net/pages/stove-manuals/ Pg 9/10)

A: All of the specifications can be found in the operator’s manual. (Specs are located on pg. 8-9) https://www.comfortbilt.net/stove-manuals/

A: We are in the process of making all of our products available in Canada. Please check our Canadian website, www.comfortbilt.biz or www.comfortbilt.ca for the most up to date information.

A: Our stoves have an active blower fan for heat convection. It is designed to draw the cooler, lower air through the stove’s heat exchange process and redistribute the hot air out of the front, near the top of the stove. Currently, there are no supported means for ducting.

A: Yes. Many customers have replaced their wood stove with a pellet stove. In order to reuse your existing stove pipe, you will most likely need a wood stove pipe reducer (https://comfortbilt.net/products/pipe-reducer) and then enough 3” pellet vent piping to connect it to the back of the stove. (Additional Clean-out Tee and/or elbows may be needed depending on your installation)

A: Installation specifications and minimum clearances can be found in the installation/operator’s manual. https://www.comfortbilt.net/pages/stove-manuals/

A: It is always recommended to use a surge suppressor/protector to help protect the computer electronics.

A: In the event of a power outage, all of the powered components will cease operation. This will include the feed auger and fans. The fire will starve and eventually go out, but there may be some smoke that leaks into the room due to the exhaust fan being inactive.

A: Any inverter or UPS with a pure sine wave output will work, do not use a partial or modified sine wave output as this can damage the computer electronics within the stove. Minimum 1000W, but 1500W is preferable for the larger spike draw during ignition.

A: The burn pot should be cleaned every hopper load of pellets burned to start. Once you are more familiar with how your stove operates, you may adjust the frequency as needed.

A: There are a few options if the stove is over producing heat. 1) You can turn the stove down. (Run it in level 1 in the manual mode, or reduce the desired temperature in temperature mode. 2) You can shut the stove down for a length of time to allow the space to cool. 3) If your software supports it, you can activate the ECO mode, which will allow the stove to automatically shut down when the desired temperature is reached.

A: The hopper has a safety switch tied to the lid opening that will shut the auger feed off when it detects the lid to be open. If refilling the hopper is done quickly, once the hopper lid shuts, normal operation should resume. Also, it is possible to fool the computer by holding down the safety lid switch. Doing so will allow the stove to continue feeding while you have the door open for pellet refill. (Please be mindful of the potential risks and keep hands and fingers clear of the auger below.)

A: The glass airwash system is a system that allows the stove to draw in clean room temperature air, to wash up the inside of the glass to help prevent excess soot buildup.  

https://www.youtube.com/watch?v=4-yoLfydlhc

A: Pellets can differ greatly between qualities and brands, but typically a softwood pellet will burn a bit hotter and produce more ash, so more airflow may be needed. This may also mean that cleaning and maintenance are needed more often. A good quality pellet that has been stored in a cool, dry place is most important. The more information about the pellet that is posted on the bag typically means the manufacturer is proud of that pellet. (BTU output, fines/dust content, moisture content, ash content, etc…) Look for a pellet that has a low moisture and ash content, and a higher BTU output. Both hardwood and softwood pellets will work in a ComfortBilt stove.

A: ComfortBilt stoves are designed for internal operation. Most of the electronic components are not weatherproofed, and will fail more quickly if left in the elements, or exposed to excess moisture. But from an operational standpoint, running a pellet stove outside (or in an open air room/deck/porch) would be like running the heat in your car while having the windows down. Yes, you would feel the heat coming out of the vents, but it would quickly dissipate and be lost.

A: Unfortunately, we are unable to provide professional installations. We do, however, have a growing dealer network that may be able to suit your needs. Feel free to reach out to us for an updated list of Comfortbilt dealers in your area.

A: In our experience, igniters fail more often than most other parts due to the stresses of ignition put on them. Depending on your area’s climate and humidity, burn pots can sometimes develop cracks and may also need to be replaced every couple of years. https://www.comfortbilt.net/pellet-stove-parts/

A: When the low temp alarm goes off, it means that the proof of fire switch has lost communication with the computer.

This usually happens because the fire got too small or went out to embers.

A handful of reasons can account for this happening, but the most common one is feeder problems.

Here is a video I made that will showcase the top feed related problems:

https://www.youtube.com/watch?v=CdvUxmwaryU

It could also be related to settings such as the feed rates too low or cleaning times too high, but the most common problem is "bridging" of the pellets, where the density of the hopper at the bottom of the auger gets too low to keep up with the demands of the fire.

Another common problem is the sensitivity of the vacuum switch.

Here is a video for that problem: https://www.youtube.com/watch?v=a0mVStSjD7U

You can clear the fault code error by holding down the On/Off button for 5 seconds